Titelbild 2022

 
INNOVATIVE ENVIRONMENTAL PROTECTION - We are committed Further Information

 

 

Description

TIPP-OIL Turboflo TU 46 is a high-quality lubricating oil for gas and steam turbines and for turbo-compressors with or without a gearbox, which meets the requirements of DIN 51 515-2. Turboflo TU 46 is made of selected base oils and a highly effective combination of additives. This guarantees very good corrosion protection and resistance to aging.

 

Instructions for use

TIPP-OIL Turboflo TU 46 is used in stationary gas turbines, steam turbines and in electric machines and machines driven by steam turbines. Turboflo TU 46 is also used for lubricating hydraulic systems, compressors, gear transmissions and bearings.

 

Quality classification Specification

  • British Standard BS 489
  • CEGB Standard 207001
  • DIN 51515-2 (L-TG)
  • DIN 51515-1 (L-TD)
  • MIL-PRF-17672 D

 

Recommendation

  • Alstom HTGD 90117 V0001 S
  • Brown Boveri HTGD 90117
  • General Electric GEK 32568 A/C
  • Siemens TLV 9013 04/01
  • US Steel 120
  • Westinghouse Electric Corp. Turbine Oil Spec.

 

Properties

  • Very good thermal stability
  • Excellent air release properties
  • Low pour point
  • Prevents foam formation
  • Excellent viscosity-temperature characteristics
  • Good wear performance
  • Excellent corrosion protection

 

Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  45,5  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C   7,0  MM²/S  DIN ISO 51562-2
 Viscosity Index   111,0    DIN ISO 2909
 Appearance  YELLOW    visually
 Density at 15°C  862,0  KG/M³  DIN EN ISO 12185
 Pour Point  -27  °C  ASTM D 7346

 

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 08.11.2021 01:00:19

Description

TIPP-OIL CLP 46 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, highpressure capacity under impact loads. Due to the low pour point of CLP 46, the cold behavior of this product is excellent.

 

Instructions for use

TIPP-OIL CLP 46 has very good properties as a lubricant. CLP 46 can therefore be used in largely all industrial areas under stress and impact loads.

 

Quality classification Specification

  • AGMA 9005-D94
  • DIN 51517-3

 

Recommendation

  • Cincinnati Milacron
  • Clean Panel Coker 
  • US Steel 224
  • US Steel S-200

 

Properties

  • A low pour point
  • An excellent wear protection
  • Prevents foam formation
  • Zinc free
  • A stable, high-pressure capacity under impact loads
  • An excellent cold behavior
  • Inhibits rust and corrosion

 

Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  46,0  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C   7,1  MM²/S  DIN ISO 51562-2
 Viscosity Index 113,0    DIN ISO 2909
 Appearance  YELLOW    visually
 Density at 15°C  861,0  KG/M³  DIN EN ISO 12185
 Pour Point  -27  °C  ASTM D 7346

 

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 04.11.2021 01:00:35

Description

TIPP-OIL CLP 320 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, highpressure capacity under impact loads. Due to the low pour point of CLP 320, the cold behavior of this product is excellent.

 

Instructions for use

TIPP-OIL CLP 320 has very good properties as a lubricant. CLP 320 can therefore be used in largely all industrial areas under stress and impact loads.

 

Quality classification Specification

  • AGMA 9005-D94
  • DIN 51517-3

 

Recommendation

  • Cincinnati Milacron
  • Clean Panel Coker 
  • US Steel 224
  • US Steel S-200

 

Properties

  • A low pour point
  • An excellent wear protection
  • Prevents foam formation
  • Zinc free
  • A stable, high-pressure capacity under impact loads
  • An excellent cold behavior
  • Inhibits rust and corrosion

 

Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  318,0  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C   24,1  MM²/S  DIN ISO 51562-2
 Viscosity Index    97    DIN ISO 2909
 Appearance  YELLOWBROWN    visually
 Density at 15°C  896,0  KG/M³  DIN EN ISO 12185
 Pour Point  -27  °C  ASTM D 7346

 

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 05.11.2021 01:00:09

Description

TIPP-OIL Turboflo TU 32 is a high-quality lubricating oil for gas and steam turbines and for turbo-compressors with or without gearbox, which meets the requirements of DIN 51 515-2. Turboflo TU 32 is made of selected base oils and a highly effective combination of additives. This guarantees very good corrosion protection and resistance to aging

 

Instructions for use

TIPP-OIL Turboflo TU 32 is used in stationary gas turbines, steam turbines and in electric machines or machines driven by steam turbines. Turboflo TU 32 is also used in lubricating hydraulic systems, compressors, gear transmissions and bearings.

 

Quality classification Specification

  • British Standard BS 489
  • CEGB Standard 207001
  • DIN 51515-1 (L-TD)
  • DIN 51515-2 (L-TG)
  • ISO 8068
  • MIL-PRF-17672 D

 

Recommendation

  • Alstom HTGD 90117 V0001 S
  • Brown Boveri HTGD 90 117
  • General Electric GEK 32568 A/C
  • Siemens 9013 05, Siemens TLV 9013 04/01
  • Solar ES 9 224 Classe II (ISO VG 32)
  • US Steel 120
  • Westinghouse Electric Corp. Turbine Oil Spec.

 

Properties

  • Very good thermal stability
  • Excellent air separation capacity
  • Low pour point
  • Prevents foam formation
  • Excellent viscosity-temperature characteristics
  • Good viscosity-temperature behavior
  • Excellent corrosion protection

 

Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  32,2  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C   5,8  MM²/S  DIN ISO 51562-2
 Viscosity Index  122,0    DIN ISO 2909
 Appearance  YELLOW    visually
 Density at 15°C  851,0  KG/M³  DIN EN ISO 12185
 Pour Point  -33  °C  ASTM D 7346

 

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 08.11.2021 01:00:16

Banner

images//Slider/Slider-hintergrund.jpg

Only at TIPP OIL

See what advantages our products have:
Deposit
ENVIRONMETAL AWARENESS  We innovatively use a deposit-back system for the plastic containers
ISO9001 GB RGB
CERTIFICATION  Quality assurance and reliability were audited during the certification according to ISO 9001:2015
Siegel premium quality
PREMIUM QUALITY   With us you receive every product delivered in the usual premium quality.
Germany
MADE IN GERMANY  All products have been manufactured under the strictest guidelines in Germany.
Logo Quality
QUALITY PRODUCT 

Our products are subject to the highest quality control.

Logo Premium
PREMIUM GUARANTEED  We guarantee that our products meet the highest standards.
Help
WE HELP  We actively support disadvantaged people.
EU Business
AWARD  Our environmental efforts have been recognized.
 

audi 770807

Contact us

We are there for you at many national and international locations.

Contact us
 

 TIPP Oil Manufacturer Ltd.Co.Kg Am Langen Kamp 2
59192 Bergkamen
Germany

Tipp Oil Manufacturer Administration GmbH

Am Langen Kamp 2
59192 Bergkamen
Germany


Further information on request from our branches and warehouses

 
Nov20359 EU BUSINESS 2020 European Enterprise Certificate 5 Page 1 Oct20667 2020 German Business Awards Winners Logo  Siegel 2022 für Nachhaltigkeit Deutsch  DIMA Guetesiegel 2021 3 Nachhaltigkeit Gewinner   ISO9001 GB RGB    BNI Unternehmen Button RGB Weiss   BVMW Member Logo
 
 

 
 




We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.