Marine MCL 8050
Description
TIPP-OIL Marine MCL 8050 is a high-quality oil with a TBN of 80 and a SAE viscosity rating of 50 for slowly rotating crosshead engines with a large stroke. Manufactured from high-quality base oils and the most modern additives, Marine MCL 8050 guarantees outstanding lubrication and thermal stability, and provides excellent protection for piston rings and liner surfaces.
Instructions for use
TIPP-OIL Marine MCL 8050 is recommended for the lubrication of slowly rotating ship diesel engines, which are operated with heavy fuel oil. It is recommended by the OEMs for motors in which there is the risk of cold corrosion. It is recommended for the latest generation of low speed crosshead engines with a large stroke (for example, MAN Mark 8 & 9).
Recommendation
- Wärtsilä
Properties
- Outstanding protection against wear and tear
- Very high thermal and oxidative stability
- Very good detergent and dispersing properties
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 212,5 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 18,6 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 97 | DIN ISO 2909 | |
| Appearance | BROWN | visually | |
| Density at 15°C | 943,0 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -24 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 27.10.2021 02:00:13
Gas Turbo 20W-50
Description
Tipp Oil Gas Turbo 20W-50 is a high-performance fuel-efficient engine oil specially developed for vehicles with gas engines.
Instructions for use
TIPP-OIL Gas Turbo 20W-50 It is suitable for year-round use in vehicles with gas engines running on LPG or CNG.
Quality classification Specification
- ACEA A3 / B4
- API SN / CF
Properties
- Very good viscosity-temperature behaviour ensures year-round suitability.
- Best low-temperature properties enable a problem-free cold start and contribute decisively to the extended service life of the engine through rapid oiling.
- New high-performance additives guarantee optimum wear protection and maximum engine cleanliness.
- l Low ash content and good resistance to nitration
- Excellent thermal oxidation stability reduces oil ageing.
- Optimal application in gas engines LPG (autogas/liquid gas) and CNG (natural gas)
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 113,0 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 16,7 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 161 | DIN ISO 2909 | |
| Appearance | YELLOW | visually | |
| Density at 15°C | 867,0 | KG/M³ | DIN 51 757 |
| Pour Point | -45 | °C | DIN ISO 3016 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 04.11.2021 01:00:43
Gas lubricants
A new lubricating oil especially for vehicles with gas engines (LPG or CNG operation). A high-performance fuel-efficient engine oil.
 |
|
CLP 680
Description
TIPP-OIL CLP 680 is produced on the basis of high quality mineral oils and proven additives. Its special combination of active ingredients achieves a stable highpressure absorption capacity under impact loads. Due to the low pour point of CLP 680, the cold behavior of this product is excellent.
Instructions for use
TIPP-OIL CLP 680 has very good properties as a lubricant. CLP 680 can therefore be used in largely all industrial areas under stress and impact loads.
Quality classification Specification
- AGMA 9005-D94
- DIN 51517-3
Recommendation
- Cincinnati Milacron
- Clean Panel Coker
- US Steel 224
- US Steel S-200
Properties
- An excellent cold behavior
- An excellent wear protection
- Prevents foam formation
- A low pour point
- Inhibits rust and corrosion
- Zinc free
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 672,0 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 38,1 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 96 | DIN ISO 2909 | |
| Appearance | YELLOWBROWN | visually | |
| Density at 15°C | 906,0 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -12 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 08.11.2021 01:00:21
