Description

TIPP-OIL Turboflo TU 68 is a high-quality lubricating oil for gas and steam turbines and for turbo-compressors with or without gearbox, which meets the requirements of DIN 51 515-2. Turboflo TU 68 is made of selected base oils and a highly effective combination of additives. This guarantees very good corrosion protection and resistance to aging.

Instructions for use

TIPP-OIL Turboflo TU 68 is used in stationary gas turbines, steam turbines and in electric machines or machines driven by steam turbines. Turboflo TU 68 is also used in lubricating hydraulic systems, compressors, gear transmissions and bearing.

Quality classification Specification

• British Standard BS 489
• CEGB Standard 207001
• DIN 51515-1 (L-TD)
• DIN 51515-2 (L-TG)
• MIL-PRF-17672 D

Recommendation

• Alstom HTGD 90117 V0001 S
• Brown Boveri HTGD 90117
• General Electric GEK 32568 A/C
• Siemens TLV 9013 04/01
• US Steel 120
• Westinghouse Electric Corp. Turbine Oil Spec

Properties

• Very good thermal stability
• Low pour point
• Prevents foam formation
• Excellent viscosity-temperature characteristics
• Excellent corrosion protection

Technical specifications

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 08.11.2021 01:00:24

Description

TIPP-OIL CLP 68 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, highpressure capacity under impact loads. Due to the low pour point of CLP 68, the cold behavior of this product is excellent.

Instructions for use

TIPP-OIL CLP 68 has very good properties as a lubricant. CLP 68 can therefore be used in largely all industrial areas under stress and impact loads.

Quality classification Specification

• AGMA 9005-D94
• DIN 51517-3

Recommendation

• Cincinnati Milacron
• Clean Panel Coker 
• US Steel 224
• US Steel S-200

Properties

• A low pour point
• An excellent wear protection
• Prevents foam formation
• Zinc free
• A stable, high-pressure capacity under impact loads
• An excellent cold behavior
• Inhibits rust and corrosion

Technical specifications

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 04.11.2021 01:00:38

Description

TIPP-OIL CLP 460 is produced on a basis of high-quality mineral oils and proven additives. Thanks to its special combination of ingredients, it achieves a stable, highpressure capacity under impact loads. Due to the low pour point of CLP 460, the cold behavior of this product is excellent.

Instructions for use

TIPP-OIL CLP 460 has very good properties as a lubricant. CLP 460 can therefore be used in largely all industrial areas under stress and impact loads.

Quality classification Specification

• AGMA 9005-D94
• DIN 51517-3

Recommendation

• Cincinnati Milacron
• Clean Panel Coker 
• US Steel 224
• US Steel S-200

Properties

• A low pour point
• An excellent wear protection
• Prevents foam formation
• Zinc free
• A stable, high-pressure capacity under impact loads
• An excellent cold behavior
• Inhibits rust and corrosion

Technical specifications

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 08.11.2021 01:00:09

Dear Customers of the Company TIPP OIL Manufacturer Ltd. & Co. KG

Due to the current situation as a result of the Corona Covid 19 pandemic, the Company TIPP OIL Manufacturer Ltd. & Co. KG as well as for the suppliers of the Company TIPP OIL Manufacturer Ltd. & Co. KG are constantly faced with a new and changed situation, for example with regard to securing production, procuring raw materials and transport.

Aware of this difficult situation, Company TIPP OIL Manufacturer Ltd. & Co. KG is constantly in intensive contact and exchange with its suppliers and business partners in order to achieve the smoothest possible contract execution within the scope of its possibilities.

Furthermore, the company TIPP OIL Manufacturer Ltd. & Co. KG, mandatory legal regulations on hygiene and distance regulations as well as very strict work safety regulations must be observed. As a result, the company TIPP OIL Manufacturer Ltd. & Co. KG, the loading processes in particular are currently extremely difficult. Where we can make use of technical aids, the Company TIPP OIL Manufacturer Ltd. & Co. KG does this as a matter of course.

Delivery delays or even delivery failures cannot be ruled out by the Company TIPP OIL Manufacturer Ltd. & Co. KG cannot be ruled out. These delivery delays caused by Corona are generally a case of force majeure, which suspends the respective performance obligations in accordance with § 275 BGB (German Civil Code).

If you have any questions or queries of any kind, please do not hesitate to contact Company TIPP OIL Manufacturer Ltd. & Co. KG and discuss the further procedure regarding your specific contractual relationship.

Thank you for your understanding and patience.

Stay healthy, take care of yourself!

With kind regards

Your team from TIPP OIL Manufacturer Ltd. & Co. KG

Legally correct text through SLB Kloepper Rechtsanwaltsgesellschaft mbH