Description
TIPP-OIL ATF DX VI Colorless is an automatic gear oil on a basis of the latest technology of HC/HT hydrocrack oils, which is permitted by General Motors for use in vehicles with automatic gearboxes. The special formulation ensures a lifespan that is twice as long as that of a comparable ATF oil. ATF DX VI Colorless meets the requirements of the gear oil specifications of General Motors for all vehicles with hydramatic automatic gearboxes from 2006 onwards.
Instructions for use
TIPP-OIL ATF DX VI Colorless is fully backward compatible with DEXRON®-III (H), III and IIE applications. Always follow the recommendations in your vehicle's instruction manual.
Quality classification Specification
- GM Dexron® VI
- Aisin Warner AW-1
ATF DX VI COLORLESS is tried and tested in practice in aggregates requiring adherence to manufacturer's fluid specifications:
- ATF Type 3.0, ATF Type 3.1
- BMW/Mini ATF 3+
- Ford/Lincoln/Mercury XT-6-DSP [SP], Ford/Lincoln/Mercury XT-6-QSP [SP]
- Honda ATF DW-1
- Hyundai/Kia NWS 9638 T-5
- Jaguar C2C 8432
- Mazda FZ, Mazda FW 6A EL, Mazda FW 6AX EL
- MB 236.12, MB 236.14, MB 236.41
- Mitsubishi ATF-J3, Mitsubishi Diaqueen ATF-PA
- Nissan Matic-S
- Porsche 000 043 304 00
- Shell 3353/134/M-1375.4/12108
- SP-IV/SPH-IV/SP-IV-RR
- Toyota Scion FZ, Toyota WS
- Volvo 97342 AT102
- VW G 052 533, VW G 055 005 A/A2, VW G 055 540 A2, VW G 060 162 A1/A2/A6
- ZF Lifeguardfluid 5/6
Properties
- Good resistance against lubricant failures under hard operating conditions
- Outstanding resistance to oil sludge and deposit formation
- Superior wear protection
- Better resistance to foaming for smooth switching
- Reduced wear of bearings, bushings and gears
- Longer oil lifespan, extension of the gearbox lifespan
- Longer change intervals
- Excellent fluidity at low temperatures
- Prevention of coupling grinding in modulation rotary converters
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 29,1 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 6,0 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 161 | DIN ISO 2909 | |
| Appearance | YELLOW | visually | |
| Density at 15°C | 841 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -48 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 22.04.2021 02:00:37
