Description

TIPP-OIL HC SHPD Diesel 10W-40 is a high-quality low-viscosity engine oil for year-round use in highly stressed naturally aspirated and turbo diesel as well as gasoline engines. It has excellent flow properties even at low temperatures. The rapid reaching of critical lubrication points ensures a considerable reduction in wear during the warm-up phase. Selected active ingredients ensure maximum engine cleanliness even in short-distance traffic. TIPP-OIL HC SHPD Diesel 10W-40 enables extended oil change intervals according to manufacturer's instructions and high wear protection with low oil and fuel consumption.

 

Instructions for use

TIPP-OIL HC SHPD Diesel 10W-40 is ideally suited for use in mixed fleets and is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.

 

Quality classification Specification

  • Global DHD-1
  • ACEA A3/B4
  • JASO DH-1
  • ACEA E3/E5/E7
  • API CI-4/SL

 Recommendation

  • Cummins CES 20077/20078
  • MB release 228.3 Licensed: API CI-4
  • MB release 229.1
  • Mack EO-N Renault VI RLD-2
  • MAN M 3275-1
  • Volvo VDS-3

 

TIPP-OIL HC SHPD Diesel 10W-40 has been tried and tested in practice in units with filling regulations:

  • Allison C-4 Deutz DQC III-10
  • Caterpillar ECF-2 MB 235.28
  • Caterpillar TO-2 MTU Type 2
  • Cummins CES 20076 Voith Retarder B
  • DAF VW 500 00/501 01/505 00
  • DDC 93K215

 

Properties

  • Very good detergent and dispersing properties
  • High oxidation and ageing stability
  • Protection against mirror surface formation
  • Good cold start properties
  • Extended oil change intervals protect natural resources

 

Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  93,8  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C  14,2  MM²/S  DIN ISO 51562-2
 Viscosity Index  155    DIN ISO 2909
 Appearance  YELLOWBROWN    visually
 Density at 15°C  863,0  KG/M³  DIN EN ISO 12185
 Pour Point  -39  °C  ASTM D 7346

 

All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 07.09.2020 02:00:16