Description
TIPP-OIL Universal UHPD 10W-40 is a universal motor oil based on selected base oils in Combination with state-of-the-art additives for all diesel engines with and without turbocharging in trucks, buses and work machines. TIPP-OIL Universal UHPD 10W-40 was developed as UHPD engine oil (Ultra High Performance Diesel) with special requirements for diesel particulate filters for LOW SAPS technology. Low sulphur, phosphorus and ash content.
Instructions for use
TIPP-OIL Universal UHPD 10W-40 is a high-performance engine oil that can be used all year round. It has been designed to meet the new exhaust emission guidelines for vehicles with exhaust gas recirculation systems. TIPP-OIL Universal UHPD 10W-40 can be used universally in all diesel engines with and without turbocharging. Suitable for EURO I, II, III, IV, V and EURO VI engines.
Quality classification Specification
- ACEA E6/E7/E9
- API CI-4
Recommendation
- JASO DH-2
- Deutz DQC-IV±LA Licensed. API CI-4 API CI-4
- Mack EO-N
- MAN M 3477
- MB release 228.51
- MTU Type 3.1
- Renault VI RLD-2
- VOLVO VDS-3
TIPP-OIL Universal UHPD 10W-40 is field-proven and tested in units with filling regulations:
- Caterpillar ECF-2 MB 226.9
- Cummins CES 20076/20077/20078
- Renault VI RXD/RGD
- DAF HP-2
- Scania Low Ash
- MAN M 3277/M 3271-1
Properties
- Excellent oxidation stability
- Very good high temperature stability
- Excellent detergent and dispersant properties
- Economy through low fuel consumption
- Excellent cold start behaviour, fast engine oil penetration even at low temperatures
- Very good viscosity-temperature behaviour
- Neutrality towards seals
- High wear protection
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 98,0 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 14,6 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 154 | DIN ISO 2909 | |
| Appearance | YELLOWBROWN | visually | |
| Density at 15°C | 860,0 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -39 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 07.09.2020 02:00:16