Description
TIPP-OIL Low SAPS HD Premium 10W-40 is a synthetic Fuel Economy Longlife engine oil for turbo diesel commercial vehicle engines. TIPP-OIL Low SAPS HD Premium 10W-40 is characterized by increased oxidation and shear stability as well as improved air separation capability to meet and exceed the latest API CK-4 requirements. TIPP-OIL Low SAPS HD Premium 10W-40 was specially developed for the latest generation of Euro IV, V and VI diesel engines with exhaust aftertreatment and soot particle filter. Extended oil change intervals according to manufacturer's instructions.
Instructions for use
TIPP-OIL Low SAPS HD Premium 10W-40 meets or exceeds the requirements of a wide range of industry and manufacturer specifications worldwide. TIPP-OIL Low SAPS HD Premium 10W-40 is particularly suitable for use in mixed fleets with Euro 2, 3, 4, 5 and 6 and thus offers the optimum solution for grade reduction. The operating instructions of the engine manufacturers must be observed.
Quality classification Specification
- API CK-4/SN
- ACEA E6/E7/E9
Recommendation
- Deutz DQC IV-10 LA
- Mack EOS-4.5
- Renault VI RLD-4
- Volvo VDS-4.5
- MB release 228.51
TIPP-OIL Low SAPS HD Premium 10W-40 is field-proven and tested in units with filling regulations:
- Caterpillar ECF-3
- Cummins CES 20086/20081
- MAN M 3477
- MTU Type 3.1
- DDC 93K222/93K218
Properties
- Very stable and excellent viscosity behaviour and high shear stability
- Fuel savings under all operating conditions
- Maintains the efficiency of exhaust gas purification systems over a very long period of time
- Performance losses caused by occupied diesel particulate filters are prevented and a higher
- Efficiency achieved Low evaporation tendency, thus low oil consumption
- Extended oil change intervals protect natural resources
- Very good cold start properties
- Low SAPS = Low sulfated ash, phosphorus and sulfur
- Can also be used in many commercial vehicles without diesel particulate filters
Technical specifications
| Properties | Data | Unit | Testing under |
| Kinematic Viscosity at 40°C | 93,8 | MM²/S | DIN ISO 51562-2 |
| Kinematic Viscosity at 100°C | 14,5 | MM²/S | DIN ISO 51562-2 |
| Viscosity Index | 161 | DIN ISO 2909 | |
| Appearance | YELLOWBROWN | visually | |
| Density at 15°C | 859,0 | KG/M³ | DIN EN ISO 12185 |
| Pour Point | -39 | °C | ASTM D 7346 |
All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 07.09.2020 02:00:16
