Suchen Sie nach Ihrem Produkt


TIPP-OIL Ultra LS HD 10W-40 is a fully synthetic, economic, long-life engine oil for commercial vehicles with a turbo diesel engine. Ultra LS HD 10W-40 ensures the highest level of cleanliness in the engine lubricating system and the diesel particulate filter with Low SAPS Technology. It prevents the diesel particulate filter from clogging and ensures extended maintenance intervals and a reduction in fuel consumption. Ultra LS HD 10W-40 was specifically developed for the newest generation of Euro IV, V and VI diesel engines with exhaust gas treatment and particulate filters. Extended oil change intervals as per manufacturer's instructions.


Instructions for use

TIPP-OIL Ultra LS 10W-40 meets or exceeds the requirements of a wide range of industry and manufacturer specifications worldwide. TIPP-OIL Ultra LS 10W-40 is particularly suitable for use in mixed fleets with Euro 2, 3, 4, 5 and 6 and thus offers the optimum solution for grade reduction. The operating instructions of the engine manufacturers must be observed.


Quality classification Specification

  • API CJ-4
  • JASO DH-2
  • ACEA E4/E6/E7/E9


  • Mack EO-O Premium Plus
  • MAN M 3477/M 3575/M 3271-1
  • MB-Approval 228.31
  • MB-Approval 228.51
  • Renault VI RLD-3
  • Scania Low Ash


TIPP-OIL Ultra LS HD 10W-40 is tried and tested in practice in aggregates requiring adherence to manufacturer's fluid specifications:

  • Caterpillar ECF-3
  • Cummins CES 20081
  • DAF
  • DDC 93K218
  • Deutz DQC IV-10 LA
  • IVECO 18-1804 TLS E9
  • IVECO 18-1809 NG2
  • MTU Typ 3.1
  • Voith Retarder B
  • Volvo CNG



  • Very stable and excellent viscosity behaviour and high shear stability
  • Fuel savings under all operating conditions
  • Maintains the efficiency of the exhaust gas purification systems over a very long period of time
  • Power losses due to occupied diesel particulate filters are prevented and a higher
  • Efficiency achieved
  • Low evaporation tendency, thus low oil consumption
  • Extended oil change intervals protect natural resources
  • Very good cold start properties
  • LowSAPS = Low sulfated ash, phosphorus and sulfur
  • Can also be used in many commercial vehicles without diesel particulate filters


Technical specifications

 Properties  Data  Unit  Testing under
 Kinematic Viscosity at 40°C  88,0  MM²/S  DIN ISO 51562-2
 Kinematic Viscosity at 100°C  13,6  MM²/S  DIN ISO 51562-2
 Viscosity Index  157    DIN ISO 2909
 Appearance  YELLOWBROWN    visually
 Density at 15°C  861,0  KG/M³  DIN EN ISO 12185
 Pour Point  -36  °C  ASTM D 7346


All declared values are approximate and subject to standard production variations. To the best of our knowledge all information reflects the current state of findings and our development. Subject to change.
Any reference to DIN standards are solely for product description purposes and do not represent a guarantee. If problems arise, please consult a technician. 19.04.2021 02:00:10


The pre-cleaner is a very powerful, water-based exterior cleaning agent for painted surfaces and glass. The product is solvent-free and wastewater friendly. The high pH value creates an energetic and powerful cleaning effect without any caustic effect.

Instructions for use:

Spray the surface and let it work for a short time. Do not let dry. Rinse the surface with a strong water jet / high-pressure cleaner. Alternatively, drive through a car wash.

Application advice:

Do not use in direct sunlight or hot surfaces. Do not let dry. Test for suitability before use. Shake well before use.


<2% complexing agents (NTA), <2% non-ionic surfactants and <1% potassium hydroxide




Shampoo power foam is a highly concentrated cleaning product for washing cars. It cleans all types of paint, metals, glass, plastic and rubber. Our product has a deep cleaning effect, dries quickly and leaves a shiny surface thanks to the gloss enhancer. It refreshes the paint, cares for rubber and plastics, seals the paint and has a slight beading effect. Aluminum is not attacked.

Instructions for use:

Pre-wash the vehicle with water. Mix warm water with shampoo in a bucket. Wipe the entire surface of the vehicle with a soft sponge, microfiber cloth or washing glove. Clean the sponge / microfiber cloth with clear water every now and then. Rinse the vehicle with clean water after cleaning. Drying with a microfiber cloth is recommended.

Application advice:

Do not use on hot surfaces. Mixture: 50 ml - 80 ml to 10 liters of water. Recommendation: use warm water. Shake well before use.


5-15% anionic surfactants, <5% amphoteric surfactants, <5% phosphonates and preservatives (5-chloro-2-methyl-4-isothiazolin-3-one)


Shampoo Powerschaum

Contact us

We are there for you at many national and international locations.

Contact us

 TIPP Oil Manufacturer Ltd.Co.Kg Am Langen Kamp 2
59192 Bergkamen

Tipp Oil Manufacturer Administration GmbH

Am Langen Kamp 2
59192 Bergkamen

Further information on request from our branches and warehouses

Nov20359 EU BUSINESS 2020 European Enterprise Certificate 5 Page 1 Oct20667 2020 German Business Awards Winners Logo  Siegel 2022 für Nachhaltigkeit Deutsch  DIMA Guetesiegel 2021 3 Nachhaltigkeit Gewinner   ISO9001 GB RGB    BNI Unternehmen Button RGB Weiss   BVMW Member Logo


We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.