TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Circulating Oil CL 320

Circulating Oil CL 320 wird auf der Basis von hochwertigen Mineralölen und bewährten Additiven hergestellt.

Circulating Oil CL 320 product data sheet
Circulating Oil CL 320 safety data sheet

Category:

Description

TIPP-OIL Circulating Oil CL 320 is manufactured based on high-quality mineral oils and proven additives. Due to its special combination of active ingredients, it is suitable for use as a simple machine lubrication, where no EP-additive-containing Oils are required.

Instructions for use

TIPP-OIL Circulating Oil CL 320 has very good properties as a lubricant. Therefore, Circulating Oil CL can be driven 320 preferably for use in the industrial and circulation systems at low and medium loads are used where lubricating oils according to DIN 51517-2 required.

specifications

  • DIN 51517-2 (CL)

Characteristics

  • Good Wear Protection
  • Prevention of the formation of foam
  • Good Water Separation Ability
  • Mild additives, therefore, particularly suitable for old machines
  • Inhibits rust and corrosion and protects against non-ferrous metal corrosion

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   328,7  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     24,4  MM²/S  ISO 51562-2
 viscosity index     95  ISO 2909
 Appearance   YELLOW  visually
 Density at 15°C  898,0  KG/M³  DIN 51 757
 pour point  -24  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.