TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

CLP 68

CLP 68 is made on the basis of high quality mineral oils and proven additives.

CLP 68 Produktdatenblatt
CLP 68 Sicherheitsdatenblatt

Category:

Description

TIPP-OIL CLP 68 is manufactured on the basis of high-quality mineral oils and proven additives. Due to its special combination of active ingredients, a stable high-pressure absorption capacity is achieved in the event of impact loads. Due to the low pour point of CLP 68, the cold behavior of this product is excellent.

Instructions for use

TIPP-OIL CLP 68 has very good properties as a lubricant. Therefore, CLP 68 can be used at constant & shock loads are used.

specifications

  • AGMA 9005-D94
  • DIN 51517-3

Recommendation

  • Cincinnati Milacron
  • Clean panel coker
  • US Steel 224
  • US Steel S-200

Characteristics

  • Excellent cold behavior
  • Excellent wear protection
  • Prevention of foam formation
  • zinc free
  • Very stable high-pressure absorption capacity under shock loads
  • Low Pour Point
  • Inhibits rust and corrosion formation

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    68,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     9,0  MM²/S  ISO 51562-2
 viscosity index   107  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  872,0  KG/M³  DIN 51 757
 pour point  -27  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.