TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FS Supreme 0W-20

FS Supreme 0W-20 is a synthetic, low-viscosity motor oil for petrol and diesel engines with and without turbocharging and direct injection.

FS Supreme 0W-20 product data sheet
FS Supreme 0W-20 safety data sheet

Category:

Description

TIPP-OIL FS Supreme 0W-20 is a synthetic smooth-running engine oil for petrol and diesel engines with and without turbocharging and direct injection. TIPP-OIL FS Supreme 0W-20 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Extended oil change intervals according to manufacturer's instructions.

Application Notes

TIPP-OIL FS Supreme 0W-20 is ideally suited for energy-saving year-round use in modern car petrol and diesel engines. It reduces CO2 emissions and helps protect the environment. TIPP-OIL FS Supreme 0W-20 is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • API SN
  • ACEA A1/B1

Recommendation:

  • MB-229.71
  • Jaguar Land Rover STJLR.51.5122

Characteristics:

  • Outstanding cold start properties even at low temperatures
  • An extremely stable and excellent viscosity behavior, shear stability
  • Fuel savings under all operating conditions
  • Very good detergent and dispersing properties
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Excellent protection against wear, corrosion and foaming
  • Extended oil change intervals protect natural resources

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   40,1  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C    8,2  MM²/S  ISO 51562-2
 viscosity index  183  ISO 2909
 appearance Yellowbrown
 visual density at 15°C  843  KG/M³  EN ISO 12185
 pour point  -45  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.