TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HLPD 10

HLPD 10 is a cleaning agent hydraulic oil and therefore has an excellent wetting and cleaning effect.

HLPD 10 Produktdatenblatt
HLPD 10 Sicherheitsdatenblatt

Category:

Description

TIPP-OIL HLPD 10 is a detergent hydraulic oil and therefore has a great wetting and cleaning effect. It is designed on the basis of selected base oils with additives to prevent corrosion, wear and tear and friction. HLPD 10 also contains dispersing and detergent agents that always ensure clean hydraulics. These additives dissolve impurities, keep them in suspension and thus enable dirty hydraulic systems to be cleaned. The functional elements of a hydraulic system thus remain free of deposits and adhesions. Penetrating amounts of water are emulsified and trouble-free operation of the hydraulic system is guaranteed.

Instructions for use

TIPP-OIL HLPD 10 It is used in hydraulic systems, in agriculture, construction machinery, cement factories, foundries, electric multi-plate clutches, as a function test oil, as a running-in oil for units and machines, in textile machines and in machine tools. HLPD 10 exceeds the requirements for hydraulic oils HLP according to DIN 51 524 Part 2 for hydraulics.

specifications

  • DIN 51524-2

Recommendation

  • Daimler Chrysler DBL 6721

Characteristics

  • High resistance to aging
  • Good air release properties
  • Neutrality towards sealing materials
  • Ash and zinc free
  • Extensive protection against wear, corrosion and foaming
  • Very stable and excellent viscosity and temperature behavior
  • Extremely good detergent and dispersing properties
  • Excellent protection against corrosion, even when absorbing moisture

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   10,2  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     2,7  MM²/S  ISO 51562-2
 viscosity index  109  ISO 2909
 Appearance  LIGHT YELLOW  visually
 Density at 15°C  836,0  KG/M³  DIN 51 757
 pour point  -45  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.