TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

LL Professional 0W-30

LL Professional 0W-30 is a synthetic, low-viscosity motor oil for petrol and diesel car engines with and without turbocharging and direct injection.

LL Professional 0W-30 Produktdatenblatt
LL Professional 0W-30 safety data sheet

Category:

Description

TIPP-OIL LL Professional 0W-30 is a synthetic smooth-running motor oil for petrol and diesel car engines with and without turbocharging and direct injection. Minimization of friction, wear and fuel consumption, excellent cold start properties. Extended oil change intervals according to manufacturer's instructions. TIPP-OIL LL Professional 0W-30 extends the service life of the diesel particle filter by reducing the concentration of ash-forming particles in the exhaust gas. Reduces harmful emissions into the environment. Offers more safety through consistently high protection of the motors. Due to its formulation with special base oils, it achieves a high viscosity index.

Application Notes

TIPP-OIL LL Professional 0W-30 is ideal for energy-saving year-round use in modern petrol and diesel engines. TIPP-OIL LL Professional 0W-30 is suitable for extended oil change intervals and extends the service life of the particle filter. The operating instructions of the vehicle and engine manufacturers must be observed.

Quality Classification Specifications:

  • ACEA C3
  • API SN

TIPP-OIL LL Professional 0W-30 has been tried and tested in aggregates with filling specifications:

  • Volkswagen 504 00/507 00
  • BMW Longlife-04
  • Fiat 9.55535-S3
  • MB 229.51/229.31
  • Porsche C30

Characteristics:

  • Outstanding cold start properties even at low temperatures below -25°C
  • An extremely stable and excellent viscosity behavior, shear stability
  • Fuel savings under all operating conditions
  • Reliable lubricating film at high operating temperatures
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Excellent protection against wear, corrosion and foaming
  • catalyst suitability
  • Extended oil change intervals protect natural resources

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C   60,6  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C   11,8  MM²/S  ISO 51562-2
 viscosity index  194  ISO 2909
 appearance Yellowbrown
 visual density at 15°C  845  KG/M³  EN ISO 12185
 pour point  -48  CELSIUS  ASTM D 7346

 
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.