TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Mineral Hydraulic HLP 100

Mineral Hydraulic HLP 100 is an optimally alloyed hydraulic oil. It has a high level of performance and a wide range of applications across the industry.

Mineral Hydraulic HLP 100 product data sheet
Mineral Hydraulic HLP 100 safety data sheet

Category:

Description

TIPP-OIL Mineral Hydraulic HLP 100 is an optimally alloyed hydraulic oil. It has a high level of performance and a wide range of applications throughout the industry. Mineral Hydraulic HLP 100 offers excellent wear protection under extreme loads. Mineral Hydraulic HLP 100 is particularly characterized by good viscosity-temperature behavior, high resistance to aging and reliable protection against corrosion.

Instructions for use

TIPP-OIL Mineral Hydraulic HLP 100 can be used universally in all hydraulic systems. The operating instructions of the vehicle and engine manufacturers must be observed.

specifications

  • AFNOR NF E 48-603 HM
  • ASTM D6158
  • CETOP RP 91H HM
  • DIN 51524-2
  • GB 111118.1 L-HM (conventional)
  • ISO 11158 HM
  • ISO 6743-4 HM
  • SAE MS1004 HM
  • SEB 181 222
  • Swedish Standard SS 155434
  • VDMA 24318

Recommendation

  • Bosch Rexroth RE 90220
  • Danieli Hydraulics
  • Denison HF-0/HF-1/HF-2
  • Sauer-Danfoss 520L0463

Characteristics

  • Neutrality towards sealing materials
  • High resistance to aging
  • Very stable and excellent viscosity and temperature behavior
  • Extensive protection against wear, corrosion and foaming

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   100,2  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    11,2  MM²/S  ISO 51562-2
 viscosity index    98  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  878,0  KG/M³  DIN 51 757
 pour point  -21  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.