TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Circulating Oil CL 220

Circulating Oil CL 220 wird auf der Basis von hochwertigen Mineralölen und bewährten Additiven hergestellt.

Circulating Oil CL 220 product data sheet
Circulating Oil CL 220 safety data sheet

Category:

Description

TIPP-OIL Circulating Oil CL 220 is manufactured based on high-quality mineral oils and proven additives. Due to its special combination of active ingredients, it is suitable for use as a simple machine lubrication, where no EP-additive-containing Oils are required.

Instructions for use

TIPP-OIL Circulating Oil CL 220 has very good properties as a lubricant. Therefore, Circulating Oil CL can be driven 220 preferably for use in the industrial and circulation systems at low and medium loads are used where lubricating oils according to DIN 51517-2 required.

specifications

  • DIN 51517-2 (CL)

Characteristics

  • Good Wear Protection
  • Prevention of foam formation
  • Good Water Separation Ability
  • Mild additives, therefore, particularly suitable for old machines
  • Inhibits rust and corrosion and protects against non-ferrous metal corrosion

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   220,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    18,6  MM²/S  ISO 51562-2
 viscosity index   93  ISO 2909
 Appearance   YELLOW BROWN  visually
 Density at 15°C  892,0  KG/M³  DIN 51 757
 pour point  -15  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Title