TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Compressor oil VDL 46

Compressor oil VDL 46 is made on the basis of high-quality, age-resistant base oils and selected additives and thus meets the high requirements of DIN 51506.

Compressoröl VDL 46 safety data sheet
Compressoröl VDL 46 product data sheet

Category:

Description

TIPP-OIL compressor oil VDL 46 is manufactured on the basis of high-quality, non-ageing base oils and selected additives and thus meets the high requirements of DIN 51506. Our ash-free compressor oil VDL 46 has good adhesive properties, is water-repellent and wear-reducing because it has low residue formation.

Instructions for use

TIPP-OIL compressor oil VDL 46 can be used in stationary and mobile compressors with compression temperatures up to 220°C. Compressor oil VDL 46 is also used for circulating lubrication of engines and diesel engines if the manufacturer does not specify HD engine oils. Use in devices of the ATLAS COPCO GA xx series is not recommended.

specifications

  • DIN 51506 (VBL, VCL, VDL)
  • ISO/DP 6521 (DAA, DAB, DAH, DAG)

Recommendation

  • ALUP
  • ATLAS COPCO
  • AUDI
  • CompAir
  • FIAC
  • FINI
  • KAESER

Characteristics

  • Ashless
  • Neutrality towards sealing materials
  • Little tendency to coking
  • Excellent resistance to aging
  • Very good viscosity-temperature behavior
  • Reliable wear protection

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    45,5  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C      7,0  MM²/S  ISO 51562-2
 viscosity index  111  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  862,0  KG/M³  DIN 51 757
 pour point  -27  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Title

Go to Top