DXS Premium 5W-30 is a synthetic Mid SAPS low-viscosity motor oil for passenger car petrol and diesel engines.
DXS Premium 5W-30 product data sheet
DXS Premium 5W-30 safety data sheet
DXS Premium 5W-30
Description
TIPP OIL DXS Premium 5W-30 is a synthetic Mid SAPS smooth-running motor oil for passenger car petrol and diesel engines with and without turbocharging and direct injection. It ensures the avoidance of premature fuel ignition LSPI (Low Speed Pre Ignition), thereby avoiding engine damage. TIPP OIL DXS Premium 5W-30 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Extended oil change intervals according to manufacturer's instructions.
Application Notes
TIPP OIL DXS Premium 5W-30 is ideally suited for energy-saving year-round use in modern passenger car petrol and diesel engines. It is recommended for Opel and General Motors passenger car engines according to the Dexos 1 Gen 2 specification under all operating conditions. The operating instructions of the vehicle and engine manufacturers must be observed
Quality Classification Specifications:
- API SP (RC)
- ILSAC GF-5 / GF-6A
Recommendation:
- dexos1TMgen 2
- Ford WSS-M2C929-A
- Ford WSS-M2C946-A / WSS-M2C946-B1
- Ford WSS-M2C961-A
- Chrysler MS-6395
- Fiat 9.55535-CR1
- GM 6094M
Characteristics:
- Very stable and excellent viscosity behavior, shear stability
- Fuel savings under all operating conditions
- Very good detergent and dispersant properties
- Neutrality towards sealing materials
- Excellent protection against wear, corrosion and foaming
- catalyst suitability
- High oxidation stability
- Reliable lubricating film at very high operating temperatures
- Very good cold start properties
Technical characteristics
| Characteristics | Data | Unit | Examination after: |
| kinematic viscosity at 40°C | 59,8 | MM²/S | ISO 51562-2 |
| kinematic viscosity at 100°C | 10,8 | MM²/S | ISO 51562-2 |
| viscosity index | 173 | ISO 2909 | |
| appearance | Yellowbrown | ||
| visual density at 15°C | 847 | KG/M³ | EN ISO 12185 |
| pour point | -45 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.
by 