TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HLPD 32

HLPD 32 is a detergent hydraulic oil and, therefore, has a high wetting and cleaning properties. HLPD 32 is designed on the Basis of selected base oils with additives to prevent corrosion, wear and friction.

HLPD 32 product data sheet
HLPD 32 safety data sheet

Category:

Description

TIPP-OIL HLPD 32 is a detergent hydraulic oil and has a large network and cleaning effect. HLPD 32 is designed on the Basis of selected base oils with additives to prevent corrosion, wear and friction. HLPD 32 in addition, dispersing and detergierenen active ingredients that provide a clean hydraulic system. These additives loosen impurities, keep them in balance and thus allow for the cleaning of soiled hydraulic systems. The functional elements of a hydraulic system will remain free of deposits and bonds. Penetrating amounts of water are emulsified and trouble-free operation of the hydraulic system is guaranteed.

Instructions for use

TIPP-OIL HLPD 32 is used in hydraulics, agriculture, construction machinery, cement factories, foundries, electric multi-disc clutches, as Funktionsprüföl, as Einlauföl for aggregates and machinery, textile machinery and machine tools. HLPD 32 exceeds the requirements of HLP hydraulic oils according to DIN 51 524 part 2 for hydraulics.

specifications

  • AFNOR NF E 48-603 HM
  • ASTM D6158
  • DIN 51524-2
  • ISO 11158 HM
  • ISO 6743-4 HM
  • JCMAS HK
  • SAE MS1004 HM
  • SEB 181 222
  • VDMA 24318

Recommendation

  • Daimler Chrysler DBL 6721
  • MAN N 698
  • Müller Weingarten
  • US Steel 127 US Steel 136

Characteristics

  • High resistance to aging
  • Good air release properties
  • Neutrality towards sealing materials
  • Ash and zinc free
  • Extensive protection against wear, corrosion and foaming
  • Very stable and excellent viscosity and temperature behavior
  • Extremely good detergent and dispersing properties
  • Excellent corrosion protection even when absorbing moisture

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    32,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     5,8  MM²/S  ISO 51562-2
 viscosity index  124  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  851,0  KG/M³  DIN 51 757
 pour point  -33  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.