TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

HVLPD 32

HVLPD 32 is a detergent hydraulic oil with high viscosity index for use in a wide temperature range (multi-range hydraulic oil).

HVLPD 32 product data sheet
HVLPD 32 safety data sheet

Category:

Description

TIPP-OIL HVLPD 32 is a detergent hydraulic oil with high viscosity index for use in a wide temperature range (multi-grade hydraulic oil). HVLPD 32, is characterized by good viscosity-temperature behaviour, high ageing stability and reliable corrosion protection. HVLPD 32 also contains dispersant and detergent active ingredients that provide a clean hydraulic system. These additives loosen impurities, keep them in balance and thus allow for the cleaning of soiled hydraulic systems. Penetrating amounts of water are emulsified and trouble-free operation of the hydraulic system is guaranteed.

Instructions for use

TIPP-OIL HVLPD 32 is mainly used in hydraulic systems, which are heavily exposed to operating temperatures, abrasion, dirt and water fluctuations. HVLPD 32 is ideally suited to forestry for heavy duty mobile (agricultural, and construction equipment) and stationary (industrial equipment, etc.) hydraulic systems.

specifications

  • AFNOR NF E 48-603
  • AFNOR NF E 48-690/1
  • CETOP RP 91H HV
  • DIN 51524-3
  • ISO 11158HV
  • ISO 6743-4 HM

Characteristics

  • Excellent wear protection
  • Good Oxidation Stability
  • Very low pour point
  • Neutral towards seals made of plastic
  • Reliable protection against corrosion, even when absorption of moisture
  • Extremely good detergent and dispersing properties
  • Good air and water assets, separation, thereby preventing the formation of foam

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    31,7  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C     6,4  MM²/S  ISO 51562-2
 viscosity index  161  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  853,0  KG/M³  DIN 51 757
 pour point  -51  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.