TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Mid SAPS SHPD 10W-30

Mid SAPS SHPD 10W-30 is a multigrade engine oil based on selected base oils and additives.

Mid SAPS SHPD 10W-30 Produktdatenblatt
Mid SAPS SHPD 10W-30 safety data sheet

Category:

Description

TIPP OIL with Mid SAPS SHPD 10W-30 is a multigrade engine oil based on selected base oils and additives. It is ideally suited for lkwdiesel engines also with turbocharging. Mid SAPS SHPD 10W-30 meets the requirements of the SAE grade 10W-30. A good lubricating film even at high temperatures.

Application Notes

TIPP OIL with Mid SAPS SHPD 10W-30 is recommended for engines with a particulate filter. Extended oil change intervals according to manufacturer's instructions. The operating instructions of the Vehicle and engine manufacturers are to be observed.

Quality Classification Specifications:

  • API CK-4/CF
  • API SN
  • ACEA E9

Recommendation:

  • Caterpillar ECF-2/ECF-3
  • Cummins CES 20081
  • DDC 93K218
  • Deutz DQC III-10 LA
  • Ford WSS-M2C 171-F1
  • Mack EO-O Premium Plus
  • MAN M3575
  • MB 228.31
  • MTU type 2.1
  • Renault VI RLD-3
  • VOLVO VDS-4

Characteristics:

  • High oxidation stability
  • Very good cold start properties
  • Reduction of black sludge formation
  • Good shear stability
  • catalyst suitability
  • Very stable and excellent viscosity-temperature behavior
  • High safety reserves even under boundary lubrication conditions
  • Best suitability for difficult operating conditions
  • Excellent detergent and dispersant properties

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  77,5  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  12,0  MM²/S  ISO 51562-2
 viscosity index  150  ISO 2909
 appearance  Yellowbrown
 visual density at 15°C  865  KG/M³  EN ISO 12185
 pour point  -42  CELSIUS  ASTM D 7346

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Go to Top