Mineral Turbo 20W-50 is a mineral multigrade motor oil for passenger car, petrol and diesel engines with and without turbocharging as well as commercial vehicle engines.
Mineral Turbo 20W-50
TIPP OIL Mineral Turbo 20W-50 is a mineral multigrade engine oil for car and truck petrol and diesel engines, with and without turbocharging, as well as for commercial vehicle engines. It enables extended oil change intervals in accordance with the manufacturer's instructions. Furthermore, it is characterized by good cold start properties, the minimization of fuel consumption, friction and wear. With TIPP OIL Mineral Turbo 20W-50, a reliable and heavy-duty engine oil has been developed.
TIPP OIL Mineral Turbo 20W-50 is suitable for year-round use in car and truck petrol and diesel engines as well as commercial vehicle engines. It is used in engines with the specified specifications. The operating instructions of the car and engine manufacturers must be observed!TIPP OIL Mineral Turbo 20W-50 is suitable for year-round use in car and truck petrol and diesel engines as well as commercial vehicle engines. It is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed!
Quality Classification Specifications:
- API CH-4
- API SL/CF
- ACEA A3/B4
- ACEA E2
TIPP OIL Mineral Turbo 20W-50 has been tried and tested in aggregates with filling specifications:
- Cummins CES 20071
- Deutz DQC II-10
- Mack EO-M
- MAN 271
- MB228.1, MB229.1
- MTU Type 1
- Volvo VDS
- VW 501 01/VW 505 00
- Good cold start properties – even at low temperatures
- Stable and excellent viscosity behavior
- Good detergent and dispersing properties
- Neutrality towards sealing materials
- Extensive protection against wear, corrosion and foaming
- catalyst suitability
- Very good shear stability
- Prevention of black sludge formation
- High oxidation stability
|kinematic viscosity at 40°C||173,7||MM²/S||ISO 51562-2|
|kinematic viscosity at 100°C||18,8||MM²/S||ISO 51562-2|
|viscosity index||123||ISO 2909|
|visual density at 15°C||890||KG/M³||EN ISO 12185|
|pour point||-33||CELSIUS||ASTM D 7346|
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.