TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Turboflo TU 46

Turboflo TU 46 is a high quality lubricating oil for Gas and steam turbines and turbo-compressors with and without a gearbox which meets the requirements of DIN 51 515-2.

Turboflo TU 46 product data sheet
Turboflo TU 46 safety data sheet

Category:

Description

TIPP-OIL Turboflo TU 46 is a high quality lubricating oil for Gas and steam turbines and turbo-compressors with and without a gearbox which meets the requirements of DIN 51 515-2. Turboflo TU 46 is made of the selected base oils and a highly effective additive combination. This guarantees a very good corrosion protection and resistance to aging.

Instructions for use

TIPP-OIL Turboflo TU 46 is used in stationary gas turbines, steam turbines, as well as in electric or steam turbine-driven machines. Turboflo TU 46 is also used for the lubrication of hydraulic systems, compressors, gear transmissions and bearings.

specifications

  • British Standard BS 489
  • CEGB Standard 207001
  • DIN 51515-2 (L-TG)
  • DIN 51515-1 (L-TD)
  • MIL-PRF-17672 D

Recommendation

  • Alstom HTGD 90117 V0001 S
  • Brown Boveri HTGD 90117
  • General Electric GEK 32568 A/C
  • Siemens TLV 9013 04/01
  • US Steel 120
  • Westinghouse Electric Corp. Turbine Oil Spec.

Characteristics

  • Very good thermal stability
  • Excellent Air Release Properties
  • Low Pour Point
  • Prevention of foam formation
  • Excellent viscosity-temperature behavior
  • Good Wear Behavior
  • Very good protection against corrosion

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    45,5  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C      7,0  MM²/S  ISO 51562-2
 viscosity index   111  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  862,0  KG/M³  DIN 51 757
 pour point  -27  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.