TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

ATF 6 HP

ATF 6HP is a synthetic gear oil on the Basis of high quality hydrocrack oils with a special additive and inhibition, which ensure the proper function of the automatic transmission.

ATF 6 HP safety data sheet

Description

TIPP-OIL ATF 6HP is a synthetic gear oil on the Basis of high quality hydrocrack oils with a special additive and Inhibition, which ensure a perfect function of the automatic transmission. It is an ATF (Automatic Transmission Fluid) is the latest Generation for all of the ZF 6-speed automatic transmission and guarantees maximum wear protection in every operating condition.

Instructions for use

TIPP-OIL ATF 6HP was developed Transmissions for use in the latest 6HP: 6HP19, 6HP19A, 6HP19X (not for Audi Q7), 6HP21, 6HP21X, 6HP26, 6HP26X, 6HP26A61 (not for Audi W12 engine), 6HP28, 6HP28X, 6HP28A61, 6HP32, 6HP32A, 6HP32X. It can be used outside of the warranty period as a replacement for the ZF-lifeguardfluid 6 (ZF no. S671 090 255).

Recommendation

  • Audi / VW Oil no. G 055005 A1 / A2 / A6
  • BMW Oil No. 8322 0142516
  • Jaguaröl No.
  • Jaguar Fluid 8432
  • Maserati Oil No. 231603
  • AML Oil No. 4G4319A509/AA/S
  • Bentley Oil no. PY112995PA
  • Hyundai Oil No. 040000C90SG
  • Land Rover Oil no. TYK500050

Characteristics

  • Reliable protection against wear, corrosion and foam formation
  • High and very stable viscosity index
  • Easily at very low temperatures
  • Very low flow limit. Very good oxidation stability
  • Good balanced coefficient of Friction
  • Neutral behaviour towards sealing materials
  • Neutral behavior by inhibition compared with non-ferrous metals

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 100°C  29,2  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    6,0  MM²/S  ISO 51562-2
 viscosity index  154  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  844,0  KG/M³  DIN 51 757
 pour point  -45  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Title

Go to Top