ATF DX VI colorless a, automatic transmission oil based on the latest technology of the HC/HT hydrocrack oils, and approved by General Motors for use in vehicles with an automatic transmission.
ATF DX VI colorless
Description
TIPP-OIL ATF DX VI Colorless a, automatic transmission oil based on the latest technology of the HC/HT hydrocrack oils, and approved by General Motors for use in vehicles with an automatic transmission. The special formulation ensures double the lifetime of a comparable ATF Oil. ATF DX VI Colorless the transmission oil specifications of General Motors for all vehicles equipped with Hydra-MATIC automatic transmission fulfilled from 2006.
Instructions for use
TIPP-OIL ATF DX VI is a Colourless fully backward compatible with DEXRON®-III (H)-, III - and II E-applications. Always follow the recommendations in your vehicle owner's manual.
Quality classification specification
- GM Dexron® VI
- Aisin Warner AW-1
Recommendation
- ATF Type 3.0, ATF Type 3.1
- BMW/Mini ATF 3+
- Ford/Lincoln/Mercury XT-6-DSP [SP]
- Ford/Lincoln/Mercury XT-6-QSP [SP]
- Honda ATF DW-1
- Hyundai/Kia NWS-9638 T-5
- Jaguar/Land Rover Fluid 8432
- Mazda FZ, Mazda FW 6A EL, Mazda FW 6AX EL
- MB 236.12, MB 236.14, MB 236.41
- Mitsubishi DiaQueen ATF J3/PA
- Nissan Matic-S
- Porsche 000 043 304 00
- Shell 3353, Shell 134, Shell M-1375.4, Shell 12108
- SP-IV/SPH-IV/SP-IV-RR
- Toyota Scion FZ, Toyota WS
- VOLVO 97342 (AT 102)
- VW G 052 533, VW G 055 005 A/A2
- VW G 055 540 A2, VW G 060 162 A1/A2/A6
- ZF LifeguardFluid 5/6
Characteristics
- Superior Wear Protection
- Less wear of the bearings, Bushings and gears
- Longer Oil Life
- Extension of the service life of the transmission
- Longer Oil Change Intervals
- Good resistance to lubricant failure under harsh operating conditions
- Outstanding resistance against Sludge and Deposit formation
- Better foaming stability for smooth Turn
- Excellent fluidity at low temperatures
- Prevention of coupling loops in modulation Rotary converters
Technical specifications
Properties | Data | unit | testing under |
Kinematic Viscosity at 40°C | 29,1 | MM²/S | ISO 51562-2 |
Kinematic Viscosity at 100°C | 6,0 | MM²/S | ISO 51562-2 |
viscosity index | 161 | ISO 2909 | |
Appearance | YELLOW | visually | |
Density at 15°C | 841,0 | KG/M³ | DIN 51 757 |
pour point | -48 | °C | ISO 3016 |