TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

CLP 220VCI

The CLP 220 VCI is made on the Basis of high-quality mineral oils and proven additives.

CLP 220 VCI product data sheet
CLP 220 VCI safety data sheet

Category:

Description

TIPP-OIL CLP 220 VCI is manufactured based on high-quality mineral oils and proven additives. Due to its special combination of active ingredients of a stable high-pressure absorption capacity in the case of impact is achieved loads. Due to the low pour point of CLP 220 VCI, the low-temperature behavior of this product is excellent. In addition, volatile corrosion inhibitors allow for excellent corrosion protection even above the oil film for longer times.

Instructions for use

TIPP-OIL CLP 220 VCI can be used anywhere, where an industry is required transmission oil according to DIN 51517 Part 3, and high shock loads occur. Driven recommended CLP 220 VCI in mostly all of the industry, the need for longer times in the Maritime areas of corrosion protection for the whole of the transmission housing.

specifications

  • AGMA 9005-D94

Recommendation

  • Cincinnati Milacron
  • Clean panel coker
  • US Steel 224
  • US Steel S-200

Characteristics

  • Excellent cold behavior
  • Low Pour Point
  • Prevention of foam formation
  • Very stable high-pressure absorption capacity under shock loads
  • Inhibits rust and corrosion, even above the oil level
  • Excellent wear protection

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   225,5  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    19,0  MM²/S  ISO 51562-2
 viscosity index    94  ISO 2909
 Appearance   YELLOW  visually
 Density at 15°C  896,0  KG/M³  DIN 51 757
 pour point  -21  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Title