FD Excellence 0W-30 is a synthetic, low-friction, Low-SAPS engine oil for passenger car diesel engines.
FD Excellence 0W-30
Description
TIPP-OIL FD Excellence 0W-30 is a synthetic Low SAPS engine oil for passenger car diesel engines. It's starting properties, minimisation of fuel consumption, friction and wear, is characterized by excellent Cold. TIPP-OIL FD Excellence 0W-30 is an engine oil, specially designed for the requirements of Ford diesel engines with diesel particulate filters. TIPP-OIL FD Excellence 0W-30 achieved by its formulation with special base oils with a high viscosity index
Application Notes
TIPP-OIL FD Excellence 0W-30 is for the energy-efficient, year-round use in modern passenger car diesel engines ideally suited. TIPP-OIL FD Excellence 0W-30 is for the energy-efficient, year-round use in modern passenger car diesel engines ideally suited. TIPP-OIL FD Excellence 0W-30 is used in the engines of Ford with the given specifications. The operating instructions of the Vehicle and engine manufacturers are to be observed.
Quality Classification Specifications:
- ACEA C2
Approvals:
- Jaguar Land Rover STJLR.03.5007
Recommendation:
- Ford WSS-M2C950-A
- Fiat 9.55535-GS1/DS1
Characteristics:
- Excellent cold starting properties, even at low temperatures below -30°C
- Fuel savings under all operating conditions
- Neutrality towards sealing properties
- Low evaporation tendency, therefore low oil consumption
- Extensive protection against wear, corrosion and foaming
- Extended oil change intervals protect natural resources
- Low SAPS = reduced sulphated ash, Phosphorus and sulfur
Technical characteristics
Characteristics | Data | Unit | Examination after: |
kinematic viscosity at 40°C | 46,0 | MM²/S | ISO 51562-2 |
kinematic viscosity at 100°C | 9,8 | MM²/S | ISO 51562-2 |
viscosity index | 206 | ISO 2909 | |
appearance | Yellow | ||
visual density at 15°C | 846 | KG/M³ | EN ISO 12185 |
pour point | -45 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.