TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

FS Dexron II E (rot)

FS Dexron II E (red) is a very high-quality synthetic transmission fluid for automatic transmissions of vehicles with the specifications GM Dexron II E, Ford Mercon and Allison C-4.

FS Dexron II E (red) safety data sheet

Description

TIPP-OIL FS Dexron II E Red is a very high-quality synthetic transmission fluid for automatic transmissions of vehicles with the specifications GM Dexron II E, Ford Mercon® and Allison C-4.

Instructions for use

TIPP-OIL FS Dexron II E Red was driven designed for the use in the built-in automatic as well as Converter and power shift transmissions with prescribed specifications. FS Dexron II E Red, it is recommended that if an ATF type Dexron II is the use of E according to the manufacturer's specifications.

Quality classification specification

  • GM Dexron II E

Recommendation

  • Allison C-4 (ATF II E)
  • Caterpillar TO-2
  • Ford MERCON®
  • MAN 339 type V2/Z2
  • MB 236.5, MB 236.8
  • VOITH H 55.6336.3 X Extended Drain (G1363)
  • ZF TE-ML 14B/04D/16L/09X

Characteristics

  • Very stable viscosity-temperature behavior
  • Thermally high load-bearing capacity
  • Foam freedom
  • Reliable protection against wear, sludge formation and corrosion
  • Problem of freedom, both at very low and high temperatures
  • Neutral behaviour towards sealing materials

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C   33,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    7,2  MM²/S  ISO 51562-2
 viscosity index  191  ISO 2909
 Appearance  RED  visually
 Density at 15°C  837,0  KG/M³  DIN 51 757
 pour point  -57  °C  ISO 3016

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.

Title

Go to Top