TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Hydraulic HVLP 68

Mineral Hydraulic HVLP 68 is a perfectly developed multi-range hydraulic oil, based on specially selected base oils.

Hydraulic HVLP 68 product data sheet
Hydraulic HVLP 68 safety data sheet

Category:

Description

TIPP-OIL Hydraulic HVLP 68 is an optimal developed multigrade hydraulic oil based on specially selected base oils. Hydraulic HVLP 68 characterized by good viscosity-temperature behaviour, high ageing stability and reliable corrosion protection.

Instructions for use

TIPP-OIL Hydraulic HVLP 68 is mainly used in hydraulic systems with strongly fluctuating operating temperatures. Hydraulic HVLP 68 is ideally suited for heavy duty hydraulic systems of earthmoving machinery and agricultural machinery. It is favoured in the case of strongly fluctuating operating temperatures, and is allowed to contain in the case of hydraulic systems, the silver or silver - plated construction and operating elements are not used.

specifications

  • AFNOR NF E 48-603 HV
  • CETOP RP 91H HV
  • DIN 51524-3
  • ISO 6743-4 HV

Recommendation

  • Denison HF-0/HF-1/HF-2
  • Eaton/Sperry Vickers 1-286-S
  • Eaton/Sperry Vickers M-2950-S
  • GM LH-04-1, GM LH-06-1, GM LH-15-1
  • US Steel 127 US Steel 136

Characteristics

  • High and stable viscosity index
  • Extensive protection against wear and corrosion
  • High demand for a long period of use
  • Very low pour point
  • High level of performance
  • Neutrality towards sealing materials
  • Good air and water separation, thereby preventing the formation of foam

Technical specifications

 Properties  Data  unit  testing under
 Kinematic Viscosity at 40°C    68,0  MM²/S  ISO 51562-2
 Kinematic Viscosity at 100°C    11,2  MM²/S  ISO 51562-2
 viscosity index  170  ISO 2909
 Appearance  YELLOW  visually
 Density at 15°C  864,0  KG/M³  DIN 51 757
 pour point  -39  °C  ISO 3016

 

All indicated data are approximate values and are subject to the Usual production fluctuations. All information correspond to the best of our Knowledge the current state of findings and our development. Ã"changes remain reserved. All references made to DIN-norms are only for the description of the goods and no warranty is intended. In this Problemfà cases, request technical advice.

Title