TIPP OIL

YOUR SPECIALIST FOR QUALITY LUBRICANTS | MADE IN GERMANY

EMISSION REDUCTION THROUGH REVOLUTIONARY REBOTTLE DEPOSIT SYSTEM

Mineral Turbo 10W-40

Mineral Turbo 10W-40 is a synthetic, low-viscosity motor oil for petrol and diesel car engines with and without turbocharging and direct injection.

Mineral Turbo 10W-40 product data sheet
Mineral Turbo 10W-40 safety data sheet

Category:

Description

TIPP OIL Mineral Turbo 10W-40 is a mineral engine oil for petrol and diesel engines with and without turbocharging. It is particularly characterized by excellent cold start properties and the minimization of fuel consumption, friction and wear. With TIPP OIL Mineral Turbo 10W-40, a reliable and heavy-duty motor oil has been developed.

Application Notes

TIPP OIL Mineral Turbo 10W-40 is ideally suited for year-round use in all modern passenger car petrol and diesel engines. It is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed!

Quality Classification Specifications:

  • API CH-4
  • API SL/CF
  • ACEA A3/B4
  • ACEA E2

TIPP-OIL Mineral Turbo 10W-40 has been tried and tested in aggregates with filling specifications:

  • Cummins CES 20071
  • Deutz DQC II-10
  • Mack EO-M
  • MAN 271
  • MB 228.1 | MB 229.1
  • MTU Type 1
  • Volvo VDS
  • Volkswagen 501 01 | Volkswagen 505 00

Characteristics:

  • Outstanding cold start properties – even at temperatures below -25°C
  • Very stable and excellent viscosity behavior
  • Very good shear stability
  • Fuel savings under all operating conditions
  • Very good detergent and dispersing properties
  • Neutrality towards sealing materials
  • Low evaporation tendency, therefore low oil consumption
  • Extensive protection against wear, corrosion and foaming
  • catalyst suitability
  • Protection of natural resources through extended oil change intervals

Technical characteristics

 Characteristics  Data  Unit   Examination after:
 kinematic viscosity at 40°C  97,0  MM²/S  ISO 51562-2
 kinematic viscosity at 100°C  14,3  MM²/S  ISO 51562-2
 viscosity index  152  ISO 2909
 appearance Yellow
 visual density at 15°C  868,0  KG/M³  EN ISO 12185
 pour point  -36  CELSIUS  ASTM D734

 

All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.