FS Excellence 0W-40 is a synthetic, low-viscosity engine oil for passenger car petrol and diesel engines with and without turbocharging and direct injection.
FD Excellence 0W-40 safety data sheet
FD Excellence 0W-40 product data sheet
FS Excellence 0W-40
Description
TIPP-OIL FS Excellence 0W-40 is a synthetic smooth-running engine oil for passenger car petrol and diesel engines with and without turbocharging and direct injection. TIPP-OIL FS Excellence 0W-40 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Extended oil change intervals according to the manufacturer's instructions. In order to guarantee the low viscosity of the SAE class 0W and at the same time a low evaporation loss, a reliable and heavy-duty engine oil was developed with TIPP-OIL FS Excellence 0W-40.
Application Notes
TIPP-OIL FS Excellence 0W-40 is ideally suited for energy-saving year-round use in all modern petrol and diesel engines in passenger cars.TIPP-OIL FS Excellence 0W-40 is ideally suited for energy-saving year-round use in all modern petrol and diesel engines in passenger cars. TIPP-OIL FS Excellence 0W-40 is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.
Quality Classification Specifications:
- ACEA A3/B4
- API SN/CF
Approvals:
- Licensed: API SN
- Porsche A40
- MB release 226.5, 229.5
- Renault RN0700/0710
- Volkswagen 502 00/505 00
TIPP-OIL FS Excellence 0W-40 has been tried and tested in aggregates with filling instructions:
- BMW Longlife-01
- Ford WSS-M2C937-A
- MB 229.3
- Fiat 9.55535-M2/Z2
- PSA B71 2296
Characteristics:
- Outstanding cold start properties even at low temperatures below -30°C
- Extremely stable and excellent viscosity behavior, shear stability
- Fuel savings under all operating conditions
- Very good detergent and dispersant properties
- Neutrality towards sealing materials
- Low evaporation tendency, therefore low oil consumption
- Excellent protection against wear, corrosion and foaming
- catalyst suitability
- Extended oil change intervals protect natural resources
Technical characteristics
| Characteristics | Data | Unit | Examination after: |
| kinematic viscosity at 40°C | 76,3 | MM²/S | ISO 51562-2 |
| kinematic viscosity at 100°C | 13,5 | MM²/S | ISO 51562-2 |
| viscosity index | 183 | ISO 2909 | |
| appearance | Yellowbrown | ||
| visual density at 15°C | 844 | KG/M³ | EN ISO 12185 |
| pour point | -54 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.
by 