FS Super 0W-40 is a synthetic high-performance engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
FS Super 0W-40
TIPP-OIL FS Super 0W-40 is a synthetic smooth-running engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.TIPP-OIL FS Super 0W-40 is a synthetic smooth-running engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.TIPP-OIL FS Super 0W-40 is characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. Extended oil change intervals according to manufacturer's instructions.In order to guarantee the low viscosity of SAE 0W well as a low evaporation loss, was developed with the TIPP-OIL FS Super 0W-40 is a reliable and heavy-duty engine oil.
TIPP-OIL FS Super 0W-40 is for the energy savings year - round use in modern passenger car gasoline and diesel engines quite well-suited.TIPP-OIL FS Super 0W-40 is for the energy savings year - round use in modern passenger car gasoline and diesel engines quite well-suited. TIPP-OIL FS Super 0W-40 is used in engines with the specifications indicated. The operating instructions of the Vehicle and engine manufacturers are to be observed.
Quality Classification Specifications:
- ACEA A3/B4
- API SN/CF
TIPP-OIL FS Super 0W-40 is proven in practice and tested in aggregates with Filling:
- BMW Longlife-01
- MB 226.5/229.3/229.5
- Porsche A40
- Volkswagen 502 00/505 00
- Fiat 9.55535-M2
- Ford WSS-M2C937-A
- PSA B71 2296
- Renault RN0700/0710
- Outstanding cold start properties even at low temperatures below -30°C
- An extremely stable and excellent viscosity behavior, shear stability
- Fuel savings under all operating conditions
- Very good detergent and dispersing properties
- Neutrality towards sealing materials
- Low evaporation tendency, therefore low oil consumption
- Excellent protection against wear, corrosion and foaming
- catalyst suitability
- Extended oil change intervals protect natural resources
|kinematic viscosity at 40°C||74,7||MM²/S||ISO 51562-2|
|kinematic viscosity at 100°C||13,5||MM²/S||ISO 51562-2|
|viscosity index||185||ISO 2909|
|visual density at 15°C||845||KG/M³||EN ISO 12185|
|pour point||-48||CELSIUS||ASTM D 7346|
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.