FS Racing 0W-50 is a synthetic high-performance motor oil for passenger car petrol and diesel engines with and without turbocharging and direct injection.
FS Racing 0W-50 safety data sheet
FS Racing 0W-50 safety data sheet
FS Racing 0W-50
Description
TIPP-OIL FS Racing 0W-50 is a synthetic high-performance engine oil for passenger car petrol and diesel engines with and without turbocharging and direct injection. TIPP-OIL FS Racing 0W-50 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. TIPP-OIL FS Racing 0W-50, a reliable and heavy-duty engine oil, was developed to guarantee the low viscosity of the SAE class 0W and, at the same time, low evaporation loss. Extended oil change intervals according to manufacturer's instructions.
Application Notes
TIPP-OIL FS Racing 0W-50 is ideally suited for performance-oriented, year-round use in all modern car petrol and diesel engines. TIPP-OIL FS Racing 0W-50 is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.
Quality Classification Specifications:
- ACEA A3/B4
- API SN/CF
TIPP-OIL FS Racing 0W-50 has been tried and tested in aggregates with filling instructions:
- MB229.3/229.1
- Volkswagen 501 01/505 00
Characteristics:
- Outstanding cold start properties even at low temperatures below -35°C
- Extremely stable and excellent viscosity behavior, shear stability
- Very good detergent and dispersant properties
- Neutrality towards sealing materials
- Low evaporation tendency, therefore low oil consumption
- Excellent protection against wear, corrosion and foaming
- catalyst suitability
- Extended oil change intervals protect natural resources
Technical characteristics
| Characteristics | Data | Unit | Examination after: |
| kinematic viscosity at 40°C | 101,6 | MM²/S | ISO 51562-2 |
| kinematic viscosity at 100°C | 17,5 | MM²/S | ISO 51562-2 |
| viscosity index | 190 | ISO 2909 | |
| appearance | Yellowbrown | ||
| visual density at 15°C | 846 | KG/M³ | EN ISO 12185 |
| pour point | -48 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.
by 