FS Ultimate 0W-40 is a synthetic, low-viscosity engine oil for passenger car petrol and diesel engines with and without turbocharging and direct injection.
FS Ultimate 0W-40
Description
TIPP-OIL FS Ultimate 0W-40 is a synthetic smooth-running motor oil for passenger car petrol and diesel engines with and without turbocharging and direct injection. TIPP-OIL FS Ultimate 0W-40 is characterized by excellent cold start properties, minimization of fuel consumption, friction and wear. Extended oil change intervals according to the manufacturer's instructions. In order to guarantee the low viscosity of the SAE class 0W and at the same time a low evaporation loss, a reliable and highly resilient engine oil was developed with TIPP-OIL FS Ultimate 0W-40.
Application Notes
TIPP-OIL FS Ultimate 0W-40 is ideally suited for energy-saving year-round use in all modern car petrol and diesel engines. TIPP-OIL FS Ultimate 0W-40 is used in engines with the specified specifications. The operating instructions of the vehicle and engine manufacturers must be observed.
Quality Classification Specifications:
- ACEA A3/B4
- API SN/CF
TIPP-OIL FS Ultimate 0W-40 has been tried and tested in aggregates with filling specifications:
- BMW Longlife-01
- MB 226.5/229.3/229.5
- Porsche A40
- Volkswagen 502 00/505 00
- Fiat 9.55535-M2
- Ford WSS-M2C937-A
- PSA B71 2296
- Renault RN0700/0710
Characteristics:
- Outstanding cold start properties even at low temperatures below -30°C
- Extremely stable and excellent viscosity behavior, shear stability
- Fuel savings under all operating conditions
- Very good detergent and dispersant properties
- Neutrality towards sealing materials
- Low evaporation tendency, therefore low oil consumption
- Excellent protection against wear, corrosion and foaming
- catalyst suitability
- Extended oil change intervals protect natural resources
Technical characteristics
Characteristics | Data | Unit | Examination after: |
kinematic viscosity at 40°C | 72,9 | MM²/S | ISO 51562-2 |
kinematic viscosity at 100°C | 13,5 | MM²/S | ISO 51562-2 |
viscosity index | 190 | ISO 2909 | |
appearance | Yellowbrown | ||
visual density at 15°C | 848 | KG/M³ | EN ISO 12185 |
pour point | -42 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.