HC LS UN 5W-40 is a synthetic low-viscosity motor oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection.
HC LS UN 5W-40
Description
TIPP OIL HC LS UN 5W-40 is a synthetic Mid SAPS engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP OIL HC LS UN 5W-40 is a synthetic Mid SAPS engine oil for passenger car gasoline and diesel engines with and without turbo-charging and direct injection. TIPP OIL HC LS UN 5W-40 is characterised by its excellent cold starting properties, minimisation of fuel consumption, friction and wear. The formulation with special base oils TIPP OIL HC LS UN 5W-40 achieves a high viscosity index. The excellent cold start behavior ensures optimum lubrication safety during the cold run phase. Because of a considerable fuel savings and the reduction of emissions TIPP OIL HC LS UN 5W-40 to protect the environment contributes. Extended oil change intervals according to manufacturer's instructions.
Application Notes
TIPP OIL HC LS UN 5W-40 is a universal, synthetic engine oil, which TIPP OIL HC LS UN 5W-40 is a universal, synthetic low-friction motor oil that was specially developed for pump-nozzle-diesel engines. TIPP OIL HC LS UN 5W-40 is suitable for petrol and diesel engines in passenger cars and vans with and without turbochargers.
Quality Classification Specifications:
- API SN/CF
- ACEA C3
Approvals:
- Licensed: API SN
- MB release 229.51
- VW 505 00/505 01
- MB-approval 229.31
- Renault RN0700/0710
TIPP OIL HC LS UN 5W-40 is proven in practice and tested in aggregates with Filling:
- BMW Longlife-04
- Ford WSS-M2C917-A
- MB 226.5
- Porsche A40
- Chrysler MS-11106
- dexos2TM
- Fiat 9.55535-S2/GH2
- VW 502 00
Characteristics:
- Outstanding cold start properties even at low temperatures below -30°C
- The function of the hydraulic tappets is guaranteed at all temperatures
- Fuel savings under all operating conditions
- Reliable lubricating film at high operating temperatures
- Neutrality towards sealing materials
- Extensive protection against wear, corrosion and foaming
- Low evaporation tendency, therefore low oil consumption
- Extended oil change intervals protect natural resources
- Mid SAPS = reduced sulfated ash, phosphorus and sulfur
Technical characteristics
Characteristics | Data | Unit | Examination after: |
kinematic viscosity at 40°C | 87,7 | MM²/S | ISO 51562-2 |
kinematic viscosity at 100°C | 14,5 | MM²/S | ISO 51562-2 |
viscosity index | 172 | ISO 2909 | |
appearance | Yellow | ||
visual density at 15°C | 849 | KG/M³ | EN ISO 12185 |
pour point | -39 | CELSIUS | ASTM D 7346 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.