Universal UHPD 10W-40 loader is a universal motor oil based on selected base oils in combination with latest additives for all diesel engines with and without turbo.
Universal UHPD 10W-40 Produktdatenblatt
Universal UHPD 10W-40 safety data sheet
Universal UHPD 10W-40
Description
Tipp Oil Universal UHPD 10W-40 is a universal engine oil based on selected base oils in combination with latest additives for all diesel engines with and without turbo charging in Trucks, buses and machinery. Universal UHPD 10W-40 was developed as a UHPD engine oil (Ultra High Performance Diesel) with the special requirements of a diesel particulate filter for the Low SAPS technology. Low sulphur, phosphorus and ash content.
Instructions for use
TIPP-OIL Universal UHPD 10W-40 is a year-round purpose high-performance engine oil. It was designed on the new regulations on Exhaust emissions for vehicles with exhaust gas recirculation systems. Universal UHPD 10W-40 is suitable for universal use in all diesel engines with and without turbo-charging. Suitable for EURO I, II, III, IV, V and EURO VI engines.
Quality classification specification
- ACEA E6/E7/E9
- API CI-4
- JASO DH-2
Approvals:
- API CI-4
- Deutz DQC IV-18 LA
- Mack EO-N
- MAN M3477
- MTU type 3.1
- Renault VI RLD-2
- VOLVO VDS-3
Recommendation:
- Caterpillar ECF-2
- Cummins CES 20076/20077/20078
- DAF HP-2
- MAN M 3271-1, MAN M 3277
- Renault VI RXD/RGD
- Scania Low Ash
Characteristics
- Excellent oxidation stability
- Very good high temperature stability
- Excellent Cold Starting Behaviour
- Neutrality towards sealing
- High wear protection
- Excellent detergent and dispersant properties
- Efficiency for low fuel consumption
- Quick-engine lubrication even at low temperatures
- Very good viscosity-temperature behavior
Technical specifications
| Properties | Data | unit | testing under |
| Kinematic Viscosity at 40°C | 98,0 | MM²/S | ISO 51562-2 |
| Kinematic Viscosity at 100°C | 14,6 | MM²/S | ISO 51562-2 |
| viscosity index | 154 | ISO 2909 | |
| Appearance | YELLOWBROWN | visually | |
| Density at 15°C | 860,0 | KG/M³ | DIN 51 757 |
| pour point | -39 | °C | ISO 3016 |
All data given are approximate values and are subject to normal production fluctuations. To the best of our knowledge, all information corresponds to the current state of knowledge and our development. We reserve the right to make changes. All references to DIN standards are only used to describe the goods and do not constitute a guarantee. In the event of problems, request technical advice.
by 